DATASHEET · REV 2026-11
BH-BX6200
ID-terminal PDA, 5.5" · ID & Biometric Terminals
Pantalla5.5"
SistemaAndroid 10.0
ProtecciónIP65
CPUocta-core 64-bit 2.0GHz
IP65
What this sheet covers
ID-terminal PDA, 5.5" · IP65.
The parameters below are the production set for the BH-BX6200. Options, firmware and accessory content vary by batch — confirm the exact configuration with the quotation, which carries the same revision number as this sheet.
- Model BH-BX6200
- Form factor ID terminals
- Sistema Android 10.0
- Scan engine 2D
- Sealing IP65
- Caída —
| Parameter | Value |
|---|---|
| Radio and network | |
| Frecuencia | 13.56MHz |
| Pantalla y plataforma | |
| CPU | octa-core 64-bit 2.0GHz |
| Sistema operativo | Android 10.0 |
| RAM / storage | 2GB+16GB (standard)/ 4GB+64GB (optional) |
| Storage expansion | supports 256GB Micro SD (TF) |
| Pantalla | 5.5" IPS (1440×720) capacitive touch |
| Captura y conexión inalámbrica | |
| Cámara | front 500 MP (optional), rear 1300 MP (with flash and autofocus, autofocus) |
| Wi-Fi | 2.4G/5Gdual-band, IEEE 802.11 a/b/g/n/ac |
| Datos móviles | 2G: GSM/GPRS/Edge (850/900/1800/1900MHz); 3G: WCDMA (850/1900/2100MHz); 4G: TDD-LTE (B38/B39/B40/B41), FDD-LTE (B1/B2/B3/B4/B7/B17/B20); supports VoLTE/ViLTE |
| Bluetooth | Bluetooth V2.1+EDR, V3.0+HS, V4.2+HS |
| E/S, alimentación y montaje | |
| Batería | 3.8V 4800mAh Li-polymer, user-replaceable |
| Puertos de E/S | Type-C data port |
| Peso | approx. 400g (with battery) |
| Entorno y conformidad | |
| Temperatura de trabajo | -20℃ ~ +55℃ |
| Temperatura de almacenamiento | -40℃ ~ +70℃ |
| Humedad | 5% ~ 95% (non-condensing) |
| Otros parámetros | |
| Expansion slots | 1 SIM slot, 1 TF slot, 2 PSAM slot (optional) |
| Posicionamiento | GPS (AGPS), BeiDou, accuracy ±5m |
| Grado de protección | IP65 |
| Scan engine | Zebra SE4710 / ME5600 / ME5800 / Honeywell N3603 / NLS-N1 / Honeywell N6703 |
| Symbologies | 1D: Code128, UCC/EAN-128, EAN-8, EAN-13, ISBN/ISSN, UPC-E, UPC-A, Code39, Codabar/NW7, Code93, Code11, Plessey, MSI/Plessey, GS1 Databar; 2D: PDF-417, QR Code, Data Matrix, Han Xin code (CMOS accuracy≥3mil) |
| Protocol | ISO 14443A/B, ISO 15693, NFC-IP1, NFC-IP2 |
| Read range | 3-5cm (tag/environment dependent) |
| Module | TCS1 biometric fingerprint, FBI FBI-certified |
| Optional modules | 433MHz, IR thermometer, vibration, precise positioningmodule |
Where this model is quoted
Deployments this configuration is specified for most often. Each link opens the workflow, the failure points and the data flow — the part a parameter table cannot show.
Ordering information
- Pedido mínimo 1 unit. Sample pricing, credited against the rollout order.
- Lead time confirmed in writing with the quote, once the configuration is fixed. A sample can move first where the model is on the shelf.
- Accessories Cradle, grip, spare pack, vehicle dock and carry case are quoted as a list with the device — ask for the accessory sheet of this model.
- Configuration Scanner output mode, kiosk lockdown, pre-installed APKs, locale and network profiles can be set before dispatch.
- Warranty 12 months as standard, extended terms on fleet orders.
How to read this sheet
- IP rating is the enclosure figure from the model's test report, not a family claim. The second digit covers water; the first covers dust.
- Drop height is stated with the test surface and whether the unit was powered on. Both change the number.
- Battery life is a working estimate under mixed use, not a laboratory maximum.
- Certificación is listed per model. A certificate that is not printed here is not carried as a stock item.
Sheets are revised with the parameter set. Ask for the current revision before a tender response — prince@brightalliance.net.