DATASHEET · REV 2026-11
BH-BX6200
ID-terminal PDA, 5.5" · ID & Biometric Terminals
Display5.5"
SystemAndroid 10.0
ProtectionIP65
CPUocta-core 64-bit 2.0GHz
IP65
What this sheet covers
ID-terminal PDA, 5.5" · IP65.
The parameters below are the production set for the BH-BX6200. Options, firmware and accessory content vary by batch — confirm the exact configuration with the quotation, which carries the same revision number as this sheet.
- Model BH-BX6200
- Form factor ID terminals
- System Android 10.0
- Scan engine 2D
- Sealing IP65
- Drop —
| Parameter | Value |
|---|---|
| Radio and network | |
| Frequency | 13.56MHz |
| Display and platform | |
| CPU | octa-core 64-bit 2.0GHz |
| Operating system | Android 10.0 |
| RAM / storage | 2GB+16GB (standard)/ 4GB+64GB (optional) |
| Storage expansion | supports 256GB Micro SD (TF) |
| Display | 5.5" IPS (1440×720) capacitive touch |
| Capture and wireless | |
| Camera | front 500 MP (optional), rear 1300 MP (with flash and autofocus, autofocus) |
| Wi-Fi | 2.4G/5Gdual-band, IEEE 802.11 a/b/g/n/ac |
| Cellular | 2G: GSM/GPRS/Edge (850/900/1800/1900MHz); 3G: WCDMA (850/1900/2100MHz); 4G: TDD-LTE (B38/B39/B40/B41), FDD-LTE (B1/B2/B3/B4/B7/B17/B20); supports VoLTE/ViLTE |
| Bluetooth | Bluetooth V2.1+EDR, V3.0+HS, V4.2+HS |
| I/O, power and mounting | |
| Battery | 3.8V 4800mAh Li-polymer, user-replaceable |
| I/O ports | Type-C data port |
| Weight | approx. 400g (with battery) |
| Environment and compliance | |
| Operating temperature | -20℃ ~ +55℃ |
| Storage temperature | -40℃ ~ +70℃ |
| Humidity | 5% ~ 95% (non-condensing) |
| Other parameters | |
| Expansion slots | 1 SIM slot, 1 TF slot, 2 PSAM slot (optional) |
| Positioning | GPS (AGPS), BeiDou, accuracy ±5m |
| Ingress protection | IP65 |
| Scan engine | Zebra SE4710 / ME5600 / ME5800 / Honeywell N3603 / NLS-N1 / Honeywell N6703 |
| Symbologies | 1D: Code128, UCC/EAN-128, EAN-8, EAN-13, ISBN/ISSN, UPC-E, UPC-A, Code39, Codabar/NW7, Code93, Code11, Plessey, MSI/Plessey, GS1 Databar; 2D: PDF-417, QR Code, Data Matrix, Han Xin code (CMOS accuracy≥3mil) |
| Protocol | ISO 14443A/B, ISO 15693, NFC-IP1, NFC-IP2 |
| Read range | 3-5cm (tag/environment dependent) |
| Module | TCS1 biometric fingerprint, FBI FBI-certified |
| Optional modules | 433MHz, IR thermometer, vibration, precise positioningmodule |
Where this model is quoted
Deployments this configuration is specified for most often. Each link opens the workflow, the failure points and the data flow — the part a parameter table cannot show.
Ordering information
- Minimum order 1 unit. Sample pricing, credited against the rollout order.
- Dispatch 48 hours on stocked models, 3–7 working days on a batch.
- Accessories Cradle, grip, spare pack, vehicle dock and carry case are quoted as a list with the device — ask for the accessory sheet of this model.
- Configuration Scanner output mode, kiosk lockdown, pre-installed APKs, locale and network profiles can be set before dispatch.
- Warranty 12 months as standard, extended terms on fleet orders.
How to read this sheet
- IP rating is the enclosure figure from the model's test report, not a family claim. The second digit covers water; the first covers dust.
- Drop height is stated with the test surface and whether the unit was powered on. Both change the number.
- Battery life is a working estimate under mixed use, not a laboratory maximum.
- Certification is listed per model. A certificate that is not printed here is not carried as a stock item.
Sheets are revised with the parameter set. Ask for the current revision before a tender response — prince@brightalliance.net.