Long-range UHF RFID pistol-grip handheld
Long-range UHF RFID pistol-grip handheld · IP65.
UNIT PHOTOS — the exact build you order is photographed before it ships.
Quoted with cradle, bracket and spare pack — not after the first breakage.
Chassis, weight, pack and panel — the four numbers that decide whether a crew keeps the device in a hand or a holster all shift. Slim & light
Keyboard-wedge, intent or SDK output — your app decides.
Sealed against dust and water on the floor, not just in a lab.
Windows, Android or Linux build — confirmed against your app before dispatch.
Field-swappable packs and dock charging keep a shift running.
An RFID reader exists because a barcode needs a line of sight and a pallet of 60 cartons does not have one. The form factor follows the job: a pistol grip for racking at 8 m, a slim handheld where the operator also scans barcodes, and a Bluetooth puck that turns a phone or tablet the site already owns into a reader for the price of a reader.
01
The terminal is bolted where the work happens: work-order scan at the station, torque-tool data over RS232, a photo of the defect attached to the order. Coolant, swarf and vibration are the design constraints.
02
Pallet labels, location labels and case labels in the same shift — often the same minute. The operator wears gloves, works at reach-truck height, and cannot walk back to a terminal to correct a mis-scan.
03
No Wi-Fi, no desk, gloves on, sun on the screen. The engineer fills a form, photographs the asset plate and syncs hours later — sometimes from a different site. The device is also the camera and the map.
Each programme started with a workflow that was losing time. The device changed; the software did not.
10 M parcels / day
Parcel & logistics
Sortation reads at belt speed; no manual re-scan when a label is creased.
Pistol-grip UHF reader + vehicle terminal on the tug
1,800 spindles
Production & MES
Spindle-level traceability replaces paper travellers on the spinning line.
Rugged tablet at the line + UHF handheld for the doff round
11,000 assets
Utilities
Substation rounds on one device: asset tag, photo, meter reading, signature.
10-inch rugged tablet, 1000-nit, GNSSRead this against your own client before the sample ships — it is the list that decides whether the device works on day one or on the third firmware build.
Every figure below is the parameter set for the BH-F3. Options and firmware vary by production batch — confirm the exact configuration when ordering.
PDF documents for the BH-F3. Open them in the browser or save them to your device; the link works on desktop and mobile.
The models below run the same firmware branch but take a different accessory set. Ask for a side-by-side sheet if the choice comes down to screen size, scan range or OS.
Stock, configuration, software compatibility and what happens when a unit fails. The answer comes from the person who configured it.
All questionsShips with the accessory list and the configuration you specify. Tell us the app and we will pre-test it before dispatch.
